Pixel structure illustration — project photo available on request.
COB P0.78 Indoor LED Display
Ultra-fine 0.78 mm COB pitch for close viewing in control rooms, boardrooms and premium retail interiors.
Not sure which LED solution is right for your project? Try our free LED Pitch Advisor and get your personalized project report.
Prefer to chat? WhatsApp us about the CCA007.
Technical Specifications
| Model | CCA007 |
|---|---|
| Pixel pitch | P0.78 mm |
| Cabinet size (W x H) | 600 x 337.5 mm |
| Cabinet area | 0.2025 m² |
| Application | Indoor |
| LED type | Flip-chip COB, 1R1G1B |
| Module size | 150 x 168.75 mm |
| Module resolution | 192 x 216 |
| Cabinet resolution | 768 x 432 |
| Cabinet depth | 39.75 mm |
| Cabinet weight | ~4 kg |
| Pixel density | 1,638,400 /m² |
| Brightness | 600 nits after calibration (adjustable 100-600) |
| Colour temperature | 9300K ± 200K |
| Viewing angle | 160° / 160° |
| Contrast ratio | 10,000:1 |
| Grey scale | 13-16 bit |
| Refresh rate | 3,840 Hz |
| Driver | Constant current, common cathode |
| Max power | ≤420 W/m² (average ≤140 W/m²) |
| Protection | Front IP54 |
| Cabinet material | Die-cast aluminium, 16:9 |
| Flatness | ≤0.1 mm |
| Maintenance | Front serviceable |
| Lifetime | ≥100,000 hours |
Source: official Vistardisplay CCA series datasheet. Specifications are for reference and may be adjusted per project.
Key Advantages
- Flip-chip COB encapsulation: the LED is sealed under a protective layer, so the surface resists moisture, dust, static and accidental contact.
- Front install and front maintenance: cabinets mount and service from the front, so the wall can sit flush against structure with no rear walkway.
- High-strength aluminium cabinets aligned on 6 axes (X, Y and Z) for small, even seams across the whole wall.
- Integrated 3-in-1 control card (sending, receiving and power in one unit) reduces cabling and points of failure.
- Module-based design: individual modules swap out quickly, keeping long-term maintenance cost and downtime low.
- 600 nits after calibration (adjustable 100-600) brightness with a wide 160° / 160° viewing angle, so the image holds up in bright indoor environments.
- Common-cathode drive with independent RGB voltage control lowers heat and power draw and keeps colour stable over continuous operation.
Typical Applications
- Control rooms and monitoring centers
- Broadcast studios and virtual sets
- Boardrooms and executive briefing rooms
- Premium retail and flagship showrooms
Not sure which pitch fits your room? Check your viewing distance in the Pitch Calculator.
Questions about the CCA007
How much does the CCA007 cost?
Pricing is individual to each project, so it is not published here. Run the free LED Pitch Advisor with your viewing distance and screen size: the downloadable project report includes an estimated price for your exact configuration.
What cabinet size does the CCA007 use?
600 x 337.5 mm, 0.2025 m2 per cabinet, in a 16:9 aspect ratio.
What viewing distance suits a P0.78 screen?
Under the recommended-pitch rule (viewing distance divided by 2 to divided by 1.5) this model is the right choice from about 1.17 m to 1.56 m. Viewers standing closer than 1.17 m should choose a finer pitch.
How many CCA007 cabinets make a 4.8 x 2.7 m screen?
8 columns by 8 rows, 64 cabinets in total, giving an exact 4.8 x 2.7 m finished surface.
Can the CCA007 be used outdoors?
No. It is an indoor COB display rated Front IP54, intended for lobbies, meeting rooms, retail interiors and similar spaces.